Ford Small Block Compatible 408 c.i. Engine - 450 Horsepower - Long Block

Ford Small Block Compatible 408 c.i. Engine – 450 Horsepower – Long Block

$7,149.00

Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. Part Number: MBP3830CT Fuel Delivery Type: Carbureted, 750 cfm * Not Included Spark Plug: Champion 13 Spark Plug Gap: .045″ Harmonic Balancer: Not included, BPP400L- 400 ci weighed, 8″ diameter Flexplate/Flywheel: Late 350 Weighted Stall Converter: N/A Intake Manifold: Marine, cast iron Fuel Recommendation: 91 Octane Timing (Initial/Total Advance): Initial timing – 10-16° and Total timing 32-34° Firing Order: 1,8,4,3,6,5,7,2 Notes: Recommended break in oil for your BluePrint Crate Engine: BPP710, Not for EGR Header Partners:  Click here for our Header Partners and recommendations. Click here to download a copy of the Installation Guide that came with your BluePrint engine.

SKU: BPF4089CT Category: Tag:

Description

Description:

  • Horsepower & Torque: 405 Horsepower / 450 FT LBS
  • Compression Ratio: 9.5:1
  • Cast Iron Heads
  • Hydraulic Roller Cam
  • Cast Steel Crank
  • Hypereutectic Pistons

Block:

  • New BluePrint Cast Iron Block
  • Square and Parallel Decked
  • Align Honed Main Bearing Bore
  • Cylinders Honed on Computer-Controlled Machine to Within .0002 Straightness and Roundness
  • Cylinders are Sonic Tested for Thickness
  • 4-Bolt Main
  • 4.000″ Bore
  • 1-Piece Rear Main Seal
  • Mech Fuel Pump Provision: Yes
  • Passenger Side Dipstick Drilled and Tapped for Clutch Linkage

Rotating Assembly:

  • New Cast Steel Crankshaft
  • 3.750″ Stroke
  • OEM Type 5.700″ Connecting Rods w/ 150,000 PSI Bolts
  • Hypereutectic Pistons
  • External Front/ External Rear Engine Balance

Cylinder Heads:

  • Vortec Cast Iron Cylinder Heads
  • 1.94 Intake Valves
  • 1.50 Exhaust Valves
  • Hardened Push Rods
  • Long Slot Rockers with Positive Lock Adjusting Nuts

Cam Specs:

  • Cam Type: Hydraulic Roller
  • .495 Intake / .502 Exhaust Lift
  • 220 Intake / 224 Exhaust Duration
  • @.050-114 Degree Lobe Separation
  • Using 1.5 Rocker’s 

Also Includes:

  • Marine Intake Manifold
  • Valve Covers
  • Oil Pan

Notes:

  • This engine is designed for CARBURETED use only. It is NOT for use in any factory fuel injected applications.
  • Replaces Standard Rotation engines only. Not available as reverse rotation.
  • BluePrint Engines recommends the use of a flame arrestor in marine applications and advises checking local laws to ensure compliance with the United States Coast Guard Requirements for Ignition Protection & Fire Resistance.
 

Additional information

Brand

Availability

In Stock
HP

405 HP / 450 FT. LBS
Pistons

Hypereutectic
Compression Ratio

9.5:1

Related products