Description
Description:
- Horsepower & Torque: 350 Horsepower / 400 FT LBS
- Compression Ratio: 9.5:1
- Cast Iron Heads
- Flat Tappet Cam
- Cast Steel Crank
- Hypereutectic Pistons
Block:
- New BluePrint Cast Iron Block
- Square and Parallel Decked
- Align Honed Main Bearing Bore
- Cylinders Honed on Computer-Controlled Machine to Within .0002 Straightness and Roundness
- Cylinders are Sonic Tested for Thickness
- 4-Bolt Main
- 4.000″ Bore
- 1-Piece Rear Main Seal
- Mech Fuel Pump Provision: Yes
- Passenger Side Dipstick Drilled and Tapped for Clutch Linkage
Rotating Assembly:
- Cast Steel Crankshaft
- 3.480″ Stroke
- OEM Type 5.700″ Connecting Rods
- Hypereutectic Pistons
- Internal Front/ External Rear Engine Balance
Cylinder Heads:
- Vortec Cast Iron Cylinder Heads
- 1.94 Intake Valves
- 1.50 Exhaust Valves
- Hardened Push Rods
- Long Slot Rockers with Positive Lock Adjusting Nuts
Cam Specs:
- Cam Type: Flat Tappet
- .480 Intake / .489 Exhaust Lift
- 226 Intake / 236 Exhaust Duration
- @.050-112° Lobe Separation Angle
Ignition Timing:
- 34 Degrees Total at 3500 RPM
Also Includes:
- New Cast Iron Marine Intake
- Valve Covers
- Oil Pan
Notes:
- This engine is designed for CARBURETED use only. It is NOT for use in any factory fuel injected applications.
- Replaces Standard Rotation engines only. Not available as reverse rotation.
- BluePrint Engines recommends the use of a flame arrestor in marine applications and advises checking local laws to ensure compliance with the United States Coast Guard Requirements for Ignition Protection & Fire Resistance.
